Before you begin: Package Contents Your package includes the following: Ethernet Switch Safety and Quick Start Guide (5-port 10/100Base-T) Certifications Information AC Power Adapter Extended Warranty and Registration Card...
Page 3
Step Hardware Installation Select an appropriate location. Connect your workstation to any available RJ-45 port on the switch using twisted- pair cable. All end-node devices must be within 328 ft (100 meters) of the connected hub. Using the hub in a stand-alone configuration, you can network up to 5 workstations. To connect a computer directly to the switch, plug one end of the cable into the switch then plug the other end of the cable into the computer’s network adapter.
Need help?
Do you have a question about the SpeedStream 2105 and is the answer not in the manual?
Questions and answers