Fill Water System - Nespresso Essenza EF 470 Service Manual

Operation

Fill water system

If the coffee machine cannot pump water
although there is water in the tank, the water
circuit may be empty.
Procedure to fill water system:
1. Perform steps 1 to 5 for preparation (see
page 8).
2. Open closing handle in vertical position.
3. Press coffee button.
4. Press and hold closing handle to rear end
position.
5. Observe capsule inlet for appearing
water.
6. Press down closing handle immediately
when first droplets are visible.
7. Press coffee button again to stop water
flow.
Service Manual EF 470 / EF 471
2
3
6
7
9
5 4
Version 1.1 en