Special Displays When All Lights Are On In Standby Source - Kenwood KDC-W4044UA Service Manual

KDC-W4044UA/W4044UAY/W4044UG/W4044UGY
KDC-W413UA/W413UAY/W4544U/W4644UY

■ Special displays when all lights are on in STANDBY source

Key
Common All lights ON.
Destination terminal
condition indication
Development ID condition
indication
Information display
Name of mechanism type
1
Mechanism version
Information display
Mechanism servo version
(USB)
Information display
Mechanism boot program
version (USB)
2 Serial No. display
3
Power ON time display
■3
4
Disc operation time display
■4
5
Disc EJECT times display
■5
6
Panel open/close times
display
■6
ROM correction version
FM
display
10
TEST MODE
Description of display
T Y P E : 1 1
8 0 1 E 2 –
9 B 2 0 :
S E R V :
B O O T :
0 0 0 0 0 0
P O N 0 H
P O N X X X
C D T 0 H
C D T X X X
E J C X X X
P C X X X
0 1 2 3 : 0 1
<System μ-com> <Mechanism μ-com>
E R R : E R
<System μ-com> <Mechanism μ-com>
– – – – : – –
<System μ-com> <Mechanism μ-com>
∗ ∗ ∗ ∗ : ∗ ∗
<System μ-com> <Mechanism μ-com>
All lights ON.
"TYPE" indicates system μ-com (IC1) destination, and shows
real-time condition of the destination terminal.
Development ID – Version (system μ-com: IC1)
3 . 0 0
Display of name of mechanism type and mechanism version
(Bolero version)
(Press the key while the display is what is shown in the left
column to change to the servo version display.)
Display of mechanism servo table version
(Press the key while the display is what is shown in the left
column to display mechanism boot program version.)
Display of mechanism boot program version
(Press the key while the display is what is shown in the left
column to return to the normal display.)
Serial No. is displayed (8 digits)
0 0
00~50 is displayed for "XX". When less than 1 hour, displayed
X X
by displayed by increments of 10 minutes.
00001~10922 is displayed for "XXXXX". MAX 10922 (hours)
X X
When Power ON time is displayed, press and hold for
2 seconds or longer to clear Power ON time.
00~50 is displayed for "XX". When less than 1 hour,
X X
displayed by increments of 10 minutes.
00001~10922 is displayed for "XXXXX". MAX 10922 (hours)
X X
While the disc operation time is displayed, press and hold for
2 seconds or longer to clear the disc operation time.
(Cleared only for displayed media.)
Disc EJECT times display. MAX 65535 (times)
X X
While disc EJECT times is displayed, press and hold for
2 seconds or longer to clear disc EJECT times.
PANEL open/close times display. MAX 65535 (times)
X X
Press the key for more than 2 seconds while the PANEL open/
close count is displayed and PANEL open/close count is cleared.
XXXX : XXXX
2 3
(System μ-com ROM correction version: Mechanism μ-com
ROM correction)
ERR : ERR
R
(System μ-com ROM correction error: Mechanism μ-com
ROM correction error)
---- : ----
– –
(System μ-com ROM correction data is not yet written:
Mechanism μ-com ROM correction data is not yet written)
**** : ***
∗ ∗
(System μ-com ROM correction data is incompatible:
Mechanism μ-com ROM correction data is incompatible)
Description