Using The Monitor; Connecting To A Pc - LG 42WS50MS Owner's Manual

16

USING THE MONITOR

USING THE MONITOR

Connecting to a PC

Your Monitor supports the Plug & Play* feature.
* Plug & Play: This is the function that allows a PC
to use the monitor without installing a driver.
NOTE
y
It is recommended to use the Monitor with
the HDMI connection for the best image
quality.
y
Use a shielded signal interface cable, such
as D-sub 15 pin signal cable and DVI cable,
with a ferrite core to maintain standard
compliance for the product.
y
If you turn the Monitor on when the set
becomes cold, the screen may flicker. This
is normal.
y
Some red, green, or blue spots may appear
on the screen. This is normal.
CAUTION
y
y
Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
y
Avoid displaying a fixed image on the screen
for a long period of time to prevent image
burn. Use a screensaver if possible.
y
When you use wireless equipment near the
product, an image problem might occur.
Connect the
signal input cable
and tighten it by
turning the screws
clockwise.