Assembly & Installation - Danuser EP6 Hex Operator's Manual

Assembly &
Installation
Skid-Steer Mount
Because of the weight of
some components, and
because some
components are difficult
to balance, two people are
required for safe
assembly and installation
of this equipment.
WARNING
Personal protection
equipment including hard
hat, safety glasses, safety
shoes, and gloves are
recommended during
assembly, installation,
operation, maintenance,
removal, or movement of
the earth auger. Do not
allow long hair, loose
fitting clothing, or jewelry
to be around moving
parts.
8
3
2
REF. NO. PART NO.
1 10488
2 10965
3 10975
4 6196
5 10198
6 -----
7 10193
8 20012
9 9598
10 1600
11 10038
10039
12 10041
10042
STEP 1: Bolt cradle assembly (2) to quick attach plate assembly (1) using bolts (3), and
secure with nuts (4). Nuts (4) must be torqued to 115 ft. lbs.
STEP 2: After removing bucket or other attachment from vehicle, secure quick attach plate
assembly (1) to vehicle per vehicle manufacturer's recommendations.
STEP 3: Attach knuckle assembly (5) to the drive unit (6) using pin (7). Secure pin (7)
with lock pin (8).
STEP 4: Attach knuckle assembly/drive unit to the quick attach plate assembly (1) using
pin (9). Secure pin (9) with klik pins (10).
1
4
10
5
7
8
DESCRIPTION
Quick Attach Plate Assembly
(includes REF. NOS. 1-5 and 9-10)
Cradle Assembly
Bolt (1/2" 13 x 1-3/4")
Nut (1/2" 13)
Knuckle Assembly
Drive Unit
Pin (1-1/4" x 9-1/2")
Lock Pin
Pin (1-1/4" x 7-1/8")
Klik Pin
Special Retaining Bolt - 2" Hex
(3/4" 10 x 4", Gr. 8, 3/4" of thread)
Special Retaining Bolt - 2-9/16" Rd.
(7/8" 9 x 4-1/4", Gr. 8, 3/4" of thread)
Nut (3/4" 10) - 2" Hex
Nut (7/8" 9) - 2-9/16" Round
Drive unit and auger
exploded views and part lists
are detailed on separate pages
in this manual.
= Safety Sign
Location
9
6
12
11
QTY.
1
1
4
4
1
1
1
1
1
2
1
1