Danuser EP6 Hex Operator's Manual page 9

Assembly &
Installation
Offset Skid-Steer Mount
Because of the weight
of some components,
and because some
components are difficult
to balance, two people are
required for servicing of
this equipment.
WARNING
Personal protection
equipment including
hard hat, safety glasses,
safety shoes, and gloves
are recommended during
assembly, installation,
operation, maintenance,
removal, or movement
of the earth auger. Do
not allow long hair, loose
fitting clothing, or jewelry
to be around moving
parts.
5
REF. NO. PART NO.
1 20652
2 10198
3 -----
4 10193
5 20012
6 9598
7 1600
8 10038
10039
9 10041
10042
After removing bucket or other attachment from vehicle, secure quick attach plate
STEP 1:
assembly (1) to vehicle per vehicle manufacturer's recommendations.
Attach knuckle assembly (2) to the drive unit (3) using pin (4). Secure pin (4) with
STEP 2:
lock pin (5).
Attach knuckle assembly/drive unit to the quick attach plate assembly (1) using
STEP 3:
pin (6). Secure pin (6) with klik pins (7).
Proceed to step 5 on page 14.
1
2
3
4
DESCRIPTION
Offset Quick Attach Plate Assembly
(includes REF. NOS. 1-2 and 6-7)
Knuckle Assembly
Drive Unit
Pin (1-1/4" x 9-1/2")
Lock Pin
Pin (1-1/4" x 7-1/8")
Klik Pin
Special Retaining Bolt - 2" Hex
(3/4" 10 x 4", Gr. 8, 3/4" of thread)
Special Retaining Bolt - 2-9/16" Rd.
(7/8" 9 x 4-1/4", Gr. 8, 3/4" of thread)
Nut (3/4"–10) - 2" Hex
Nut (7/8" 9) - 2-9/16" Round
Drive unit and auger exploded
views and part lists are
detailed on separate pages in
this manual.
= Safety Sign
Location
7
6
9
8
QTY.
1
1
1
1
1
1
2
1
1
9