Windows 98/Me/Nt/2000/Xp; System Requirements; For Windows 98/Me - SMC Networks EZ Connect SMC2642W User Manual

Chapter 4
This chapter describes the instructions that guide you through the proper
installation of your SMC2642W 11Mbps Wireless Compact Flash Card for the
Windows 98/ME/NT/2000/XP operating systems.

4-1 System Requirements

In order to use the SMC2642W 11Mbps Wireless CF Card, your computer must
be equipped with the following:
1. A PCMCIA Type II slot, and a PCMCIA card and socket services compliant
with revision 2.10 of the PCMCIA specification (or higher).
2. Windows 98/ME/NT/2000/XP (with a Windows installation CD-ROM,
diskettes for use during installation)
3. Minimum 500 Kbytes free disk space for installing driver and utility program.
4-2 Setting Up SMC2642W Wireless CF Card

for Windows 98/ME

1. If your PC has a compact flash type II slot, simply insert the SMC2642W
Wireless Compact Flash Card into the CF slot.
SMCCF-CVT CF to PCMCIA Converter as stated in no. 2 below.
2. Firmly insert the SMC2642W 11Mbps Wireless Compact Flash Card into the
SMCCF-CVT CF to PCMCIA Converter, as shown below. Then insert the
11Mbps Wireless Compact Flash Card into the PCMCIA slot of your
computer.
NOTE 1: SMC2642W only supports 3.3v. Make sure your Laptop supports
3.3v.
Installing the SMC2642W Wireless CF Card
Under Windows 98/ME/NT/2000/XP
SMCCF-CVT CF to PCMCIA Converter
SMC2642W
-19-
If not, use the