OneTouch VitA User Handbook Manual page 37

2. Press to display the
When the
APPLY CONTROL
is displayed, you can be sure that
the test result will be correctly
recorded in the meter memory
as a control solution test.
3. Prepare and apply control solution
Shake the control solution vial and remove the cap.
Squeeze the vial to discard the first drop, then wipe the tip
with a clean tissue or cloth.
Touch and hold a hanging drop of control solution to
the narrow channel in the
Control solution should not be applied on top of the
test strip.
Customer Care Freephone 0800 121 200 (UK) or 1800 535 676 (Ireland)
Control solution testing
APPLY CONTROL
screen
APPLY CONTROL
top edge
of the test strip.
NARROW CHANNEL
TOP EDGE
screen
�
Apply drop here
31