LG PF80A Owner's Manual page 5

Led 1000 hd digital art projector
Table of Contents

Advertisement

y
Be careful not to tip the projector over
when connecting external devices to
the projector.
- This may cause personal injury or
damage to the projector.
Power
WARNING
y
The grounding wire should be con-
nected.
- Ensure that you connect the ground-
ing cable to avoid electric shock.
If it is not possible to ground the unit,
have a qualified electrician install a
separate circuit breaker.
Do not try to ground the projector
by connecting it to telephone wires,
lightning rods, or gas pipes.
y
The power plug should be inserted
fully into the power outlet.
- An unstable connection may cause
a fire.
y
Do not place heavy objects on the
power cord.
- This may result in fire or electric
shock.
y
Never touch the power plug with wet
hands.
- This may result in electric shock.
y
Do not plug too many devices into
one multi-power outlet.
- This may result in fire due to the
power outlet overheating.
y
Prevent dust from collecting on the
power plug pins or outlet.
- This may result in fire.
y
To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
SAFETY INSTRUCTIONS
CAUTION
y
Hold the plug firmly when unplugging.
- A damaged wire may create a fire
hazard.
y
Ensure the power cord and plug are
not damaged, modified, severely
bent, twisted, pulled, sandwiched,
or hot. Do not use the product if the
power outlet is loose.
- This may result in fire or electric shock.
y
Keep the power cord away from heating
devices.
- The wire's sheath may melt, which
may result in fire or electric shock.
y
Place the projector where people will
not trip over or walk on the power
cord to protect the power cord and
plug from any damage.
- This may result in fire or electric shock.
y
Do not turn the projector on or off by
plugging in the power plug or unplug-
ging it from the power outlet.
(Do not use the power plug as a switch.)
- This may result in electric shock or
damage to the product.
y
Do not insert a conductor into the other
side of the wall outlet while the power
plug is inserted into the wall outlet.
In addition, do not touch the power
plug immediately after it is disconnected
from the wall outlet.
- This may result in electric shock.
y
Use only the official power cord which
is provided with the product. Do not
use other power cords.
- This may result in fire or electric
shock.
5

Advertisement

Table of Contents
loading

Table of Contents