Additional Options; Adjusting Aspect Ratio; Using The Keystone Function - LG PF80A Owner's Manual

Additional Options

Adjusting Aspect Ratio

y
Press the SETTINGS button on the
remote control. Select PICTURE →
Aspect Ratio to change the aspect
ratio.
y
You can also use the Q.MENU or
RATIO button.
Menu
Resizes images to fit the
16:9
screen width.
Just Displays video images in
Scan the original size without
removing parts of the edge
of the image.
y
In HDMI/Component (over
720p) mode, Just Scan
is available.
Set By Depending on the input
Program signal, screen aspect ratio
changes to 4:3 or 16:9.
4:3 Resizes the image ratio to
fit 4:3 screen.
Resizes the image to fit the
Zoom
screen width. The top and
bottom parts of the image
may be cut off.
Cinema Formats an image to the
Zoom 1 cinemascope ratio (2.35:1)
and zooms in on the ratio.
NOTE
y
Available picture size may differ
depending on the input signal.
y
The screen aspect ratios on HDMI-
PC input are available in 4:3 and
16:9 only.
Description
USING THE PROJECTOR
Using the Keystone
Function
To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set up at a right
angle to the screen.
Because the Keystone function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
1
Press the Key's
button to adjust the picture.
y Keystone can be adjusted
from -40 to 40.
2
Press the OK button when done.
25
or Key's