Smartshare™ Pc Sw Installing & Setting - LG PF80A Owner's Manual

SmartShare™ PC SW Installing & Setting
Install the SmartShare™ PC SW(DLNA) programme on your PC.
1
Download the setup file from the path below in order to use the DLNA function.
http://liu.lge.com/smartshare/release/smartshare.zip
2
Install the downloaded SmartShare™ PC software.
3
You can run the programme when installation is complete.
NOTE
y
DLNA or Media Link service is only available if projector and other devices are
connected via a single router.
PC requirement for installing LG SmartShare™
Item
CPU
RAM
VGA
Hard Disk Drive
Operating
System
Network
Environment
y
Program speed can be delayed depending on the system performance and the
network environment.
Minimum Specifications
Intel Pentium 4 2.0 G or higher/
AMD Sempron 2000 or higher
1 GB or higher
64 MB RAM, 1024 x 768 or
higher resolution, and a video
card that supports 16 bit or
more colors
Windows XP (Service Pack 2 or later), Windows Vista, Windows
7, Windows 8
l Windows Media Player: 11.0.5721.5280 or higher is
recommended
100 MB Ethernet, Wireless LAN (WLAN) IEEE 802.11g or higher
Recommended
Specifications
Intel Pentium Dual Core or
higher/AMD Athlon 64 x 2 or
higher
2 GB or higher
128 MB RAM, 1024 x 768 or
higher resolution, and a video
card that supports 16 bit or
more colors
200 MB or higher
49
SMARTSHARE