Table of Contents
Advertisement
07 Driver support
||
2. Scroll with the
button until the com-
bined instrument panel shows a mark (5)
by the desired maximum speed.
> The speed limiter is then active and the
selected max. speed is stored in the
memory.
Related information
•
Speed limiter* (p. 189)
07
*
190
Option/accessory, for more information, see Introduction.
Speed limiter* - changing speed
Changing the stored speed
Stored maximum speed is changed with
short or long presses on the
To adjust +/- 5 km/h:
•
Use short presses - each press gives
+/- 5 km/h.
To adjust +/- 1 km/h:
•
Hold the button depressed and release
when the combined instrument panel's
mark is by the desired maximum speed.
Last press made is stored in the memory.
Related information
•
Speed limiter* (p. 189)
Speed limiter* - temporary
deactivation and standby mode
A (Speed Limiter) can be regarded as a
reverse cruise control - the driver regulates
or
button.
the speed using the accelerator pedal but is
prevented from accidentally exceeding a pre-
selected/set speed by the speed limiter.
Temporary deactivation - standby mode
To temporarily deactivate the speed limiter
and set it in standby mode:
–
Press
> The mark (5) in the combined instru-
ment panel changes colour from
GREEN to WHITE and the driver can
temporarily exceed the set maximum
speed.
The speed limiter is reactivated with
one press on
changes colour from WHITE to GREEN
and the car's maximum speed is lim-
ited once again.
Temporary deactivation with the
accelerator pedal
The speed limiter can also be set in standby
mode with the accelerator pedal, e.g. for rap-
idly accelerating the car out of a situation:
.
. The mark (5) then
Advertisement
Table of Contents
