Volvo S 60 Owner's Manual page 333

Hide thumbs Also See for S 60:

Table of Contents

5. Screw together the towing eye with the

wheel wrench* until the stop position in

accordance with the following figure.

The towing eye must be screwed into all

threads in the wheel bolt wrench.

6. Loosen the wheel bolts ½-1 turn anti-

clockwise with the wheel wrench.

Never position anything between the

ground and the jack, nor between the jack

and the car's jacking point.

7. There are two jacking points on each side

of the car. There is a recess in the plastic

cover at each point. Crank the foot of the

jack down so it is pressed squarely on the

The ground must be firm, smooth and

8. Lift the car so that the wheel is free.

Remove the wheel bolts and lift off the

09 Wheels and tyres

Related information

Changing wheels - fitting (p. 332)

Jack* (p. 326)

Warning triangle (p. 334)

Wheel bolts (p. 325)

Option/accessory, for more information, see Introduction.