6)
Disconnect the connector. Remove the screw, and remove the
paper alignment motor F.
K. Paper alignment motor R
1)
Disconnect the connector. Remove the screw, and remove the
paper alignment motor R.
L. Paper alignment plate home position sensor F
1)
Remove the screw, remove the mounting plate, and discon-
nect the connector. Remove the paper alignment plate home
position F sensor from the mounting plate.
M. Paper alignment plate home position sensor R
1)
N. Staple tray paper detector
1)
2)
3)
MX-FN23 DISASSEMBLY AND ASSEMBLY 8 – 6
Remove the screw, remove the mounting plate, and discon-
nect the connector. Remove the paper alignment plate home
position R sensor from the mounting plate.
Remove the screw, and remove the sensor holder and the rear
edge regulation plate.
Remove the screw, and remove the jogger F and the jogger R.
Remove the screw, and remove the alignment tray upper unit.