Filter Systems; Air Filter - Polaris 2013 RANGER 500 Midsize Owners Manual/Install Manual

Filter Systems

Air Filter

Always change the air filter at the intervals outlined in the Periodic Maintenance Chart
beginning on page 43. Service the air filter more frequently if the vehicle is operated in wet
conditions or at high throttle openings for extended periods.
1. Lift the cargo box to access the air box.
2. Remove the air box cover and inspect the
gasket. It should adhere tightly to the cover
and seal all the way around.
Tip: Grasp the filter end to prevent damage to the fil-
ter paper.
3. Remove the air filter.
4. Do not attempt to clean the main element.
Install a new air filter.
Tip: Apply a small amount of general purpose grease
to the sealing edges of the filter before installing.
5. Inspect the air box for oil or water deposits.
If present, drain them into a suitable con-
tainer.
Breather Filter and Hoses
1. Lift the cargo box and locate the air box.
2. Follow the right-hand breather line out the
side of the air box and locate the filter.
3. Remove and inspect the filter for debris. Blow
gently through the filter in the direction of the
arrow to check for clogging. Replace as
needed.
4. Check hoses for cracks, deterioration, abra-
sion, or leaks. Replace as needed.
5. Reinstall the filter with the arrow pointing
toward the engine. Secure the clamps.
NOTICE: Operation of the vehicle without a breather
filter can cause engine damage. Always
reinstall the breather filter after removing it for
service.
MAINTENANCE
Air Filter
57