Filter Systems - Polaris RZR 170 Owner's Manual

Filter Systems

Air Filter
Always change the air filter at the
intervals outlined in the Periodic
Maintenance Chart beginning on page 53.
Access the air box through the access
cover on the forward surface of the rear
body panel.
1. Move or remove the storage bag.
Remove the four (4) access cover
fasteners to remove the access cover.
2. Release the air box cover spring clips
and remove the cover.
3. Loosen the air filter clamp. Remove
the air filter.
4. Clean away any oil or sediments in
the air box.
5. Apply a commercially available
chassis lubricant to the inside lip of
the new air filter. Install the filter and
tighten the clamp.
6. Reinstall the air box cover and secure
the clips.
NOTICE: Never operate the vehicle with the
filter element removed. Dirt will enter
the engine, causing rapid wear and
severe damage to the engine.
7. Reinstall the access cover and storage
bag.
MAINTENANCE
Access Cover
Lubricant
Filter
67