Toyota 2000 Land Cruiser Owner's Manual page 19

WWW.MANUALS.WS
2. Remove the module from the
frame.
WWW.MANUALS.WS
L/C 100_U
key 3. Remove the 2 screws to take out the
lid of the module. Take out the dis-
charged battery and put a new battery
with the positive side up.
NOTICE
Do not bend the terminals.
2000 L/C 100 (OM60866U)
4. Install the lid with the 2 screws.
5. Install the module into the key frame
and secure the cover with the screw.
6. When pushing any switch on the wire-
less key, make sure the indicator light
comes on.
NOTICE
z Make sure the positive side and
negative side of the battery should
be faced correctly.
z Be careful not to bend the electrode
of the battery insertion and that
dust or oils do not adhere to the
case.
z Take care not to lose the screws.
z Close the cover securely.
19