Toyota 2000 Land Cruiser Owner's Manual page 128

WWW.MANUALS.WS
To scan all the frequencies:
Quickly push and release "SCAN". If you
hear a beep, you held the button too long,
and the radio will scan the preset sta-
tions. The radio will find the next station
up the station band, stay there for 5 se-
conds, and then scan again. To select a
station, push "SCAN" again.
Compact disc player
There are two scan features—you can ei-
ther scan the tracks on a specific disc or
scan the first tracks of all the discs in the
player.
Scanning the tracks on a disc:
Quickly push and release "SCAN". "SCAN"
will appear on the display and the player
will scan all the tracks on the disc you
are listening to. If you hear a beep, you
held the button too long, and the player
will scan the first track of all the discs in
the player. To select a track, push "SCAN"
again. If the player scanned all the tracks
on the disc, it will stop scanning.
128
WWW.MANUALS.WS
L/C 100_U
Scanning the first track of all the discs in
the player:
Push "SCAN" until you hear a beep.
" ·SCAN" will appear on the display
and the player will perform the first track
of the next disc. To select a disc, push
the "SCAN" again. If the player
scanned all the discs, it will stop scan-
ning.
SEEK (Seeking)
Radio
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek a station, quickly push and re-
lease the " " or " " under the "SEEK".
Do this again to find another station.
Cassette Player
By using this button, you can skip up or
down to a different track.
You can skip up to nine tracks at a time.
Push the up or down side of the button.
"FF 1" or "REW 1" will appear on the
display.
2000 L/C 100 (OM60866U)
Next, push either side of the track button
until the number on the display reaches
the number of tracks you want to skip. If
you push the button ten times, the skip
feature will be turned off.
When counting the number of tracks you
want to rewind, remember to count the
has
current track as well. For example, if you
want to rewind to a song that is two be-
fore the song you are listening to, push
on the down side of the button until "REW
3" appears on the display.
If you have pushed the track button more
than you wanted to, push the other side
of the button. The track number will be
reduced.
The track number you select is not valid
if it is higher than the number of tracks
remaining on the current cassette side.
D
After the beginning of the tape is
reached, the player will automatically
start playing the same side.
D
After the end of the tape is reached,
the player will automatically reverse
sides and start playing the other side.