Advertisement
III. Battery Installation
This scale should come with batteries in the box. To
install the batteries, turn the scale over and remove the
battery cover. Insert two (2) AAA batteries according to
the diagram inside the battery compartment. Replace the
battery cover. Also insert two (2) AAA batteries into the
back of the remote display according to the diagram.
IV. Turning the Scale On and Off
This scale has an Auto-On and Auto-Off feature. The scale
will automatically turn on when the user steps on the
platform and automatically turn off after the user steps
off the platform. This scale is ready to weigh, and does not
require tapping first before stepping on the scale.
V. Clock & Temperature Mode
The remote display defaults to clock / temp. mode after 18
seconds of non-use. To set the clock:
•
In clock / temp. mode, hold the
current year will begin to flash. Press and to adjust
the value. Now press
•
The month will begin to flash. Press
the value. Now press
•
The day will begin to flash. Press
(Set) button. The
to accept.
and to adjust
to accept.
and to adjust the
4
Advertisement
