Britax B-SAFE User Manual page 27

• Push the infant car seat firmly
into the vehicle seat while
removing all slack from the lap
portion and then the shoulder
portion of the vehicle belt.
IMPORTANT: If you cannot lock
your vehicle seat belt you must use a
locking clip. Locking clips are available
from Britax at 1-888-427-4829.
• Adjust the infant car seat
handle to any locked position.
• Verify that all connections are secure. Check that:
* The vehicle belt is not twisted.
* The vehicle belt is tight and locked.
* The infant car seat handle is rotated into any locked position.
* The infant car seat is secure and it moves less than 2.5 cm (1 in.)
front-to-back or side-to-side at the vehicle belt path.
* Check the recline angle. The proper recline angle is achieved when
the recline angle line on the car seat is level to the ground.
Installing without Base
25