Table of Contents
Advertisement
Quick Links
UHF WIRELESS MICROPHONE
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
1. SAFETY PRECAUTIONS
• Be sure to read the instructions in this section carefully before use.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
WARNING
CAUTION
WARNING
• To prevent the electromagnetic wave from badly
influencing medical equipment, make sure to
switch off the unit's power when placing it in close
proximity to the medical equipment.
CAUTION
• When the unit is not in use for 10 days or more, be
sure to take the battery out of the unit because
battery leakage may cause personal injury or
contamination of environment.
Indicates a potentially hazardous situation which, if mishandled, could result in
death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could result in
moderate or minor personal injury, and/or property damage.
OPERATING INSTRUCTIONS
• Make sure to observe the following handling
precautions so that a fire or personal injury does
not result from leakage or explosion of the battery.
· Do not short, disassemble, heat nor put the
battery into a fire.
· Never charge batteries of the type which are not
rechargeable.
· Do not solder a battery directly.
· Be sure to use the specified type of battery.
· Note correct polarity (positive and negative
orientation) when inserting a battery in the unit.
· Avoid locations exposed to the direct sunlight,
high temperature and high humidity when storing
batteries.
WM-4200
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Toa WM-4200
Summary of Contents for Toa WM-4200
-
Page 1: Operating Instructions
OPERATING INSTRUCTIONS UHF WIRELESS MICROPHONE WM-4200 Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference. 1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use. -
Page 2: General Description
• Never open nor remove the unit case to modify the unit. Refer all servicing to your nearest TOA dealer. • Take care not to drop the unit onto the floor nor bump it against a hard object as the unit could fail. -
Page 3: Battery Insertion
The orange LED indicates the circuit is active. Moving the knob strongly beyond the ON position locks the switch in place. Step 4. Make sure to shift the ON/OFF switch back to the OFF position after using the WM-4200 wireless microphone. To release the switch from lock, move the knob strongly toward the OFF position. - Page 4 10. AUDIO LEVEL ADJUSTMENT (SENSITIVITY CONTROL) The microphone sensitivity is variable within a range of 15 dB. To change the factory-preset level, follow the procedures below. Audio level control Step 1. Holding the microphone body, rotate the microphone grip counterclockwise to remove it. Step 2.
Need help?
Do you have a question about the WM-4200 and is the answer not in the manual?
Questions and answers