Video Settings - Sony Bravia KDL-52V5500 Operating Instructions Manual

4:3 Default
Display Area
Horizontal Shift
Vertical Shift
Vertical Size
Screen (for PC input)
Auto Adjustment
Reset
Phase
Pitch
Horizontal Shift
Vertical Shift
Wide Mode

Video Settings

Colour System
34
GB
Sets the default Wide Mode for 4:3 broadcasts.
Wide Zoom Enlarges the 4:3 picture to fill the 16:9 screen, keeping the
original image as much as possible.
Normal
Displays conventional 4:3 broadcasts in the correct
proportion.
Off Uses the setting that you specified in "Wide Mode."
Adjusts the picture display area.
Auto Automatically switches to the most appropriate display area.
Full Pixel Displays pictures in their original size when parts of the
picture are cut off.
+1 Displays pictures in their original size.
Normal Displays pictures in their recommended size.
-1/-2 Enlarges the picture so that the edges are outside the visible
display area.
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture when "Wide Mode" is set to "Wide
Zoom" or "Zoom."
Adjusts the vertical size of the picture when "Wide Mode" is set to "Wide Zoom."
Automatically adjusts the display position, phase, and pitch of the picture when the
TV receives an input signal from the connected PC.
z
• "Auto Adjustment" may not work well with certain input signals. In such cases,
manually adjust "Phase," "Pitch," "Horizontal Shift," and "Vertical Shift."
Resets all PC screen settings to factory settings.
Adjusts the phase when the screen flickers.
Adjusts the pitch when the picture has unwanted vertical stripes.
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture.
Sets "Wide Mode" for displaying pictures from your PC.
Normal
Displays the picture in its original size.
Full 1
Enlarges the picture to fill the vertical display area, while
maintaining its original proportion.
Full 2 Enlarges the picture to fill the display area.
Sets the colour system ("Auto," "PAL," "SECAM," "NTSC3.58," or "NTSC4.43")
according to the input signal from the input source.