Siemens S65 User Manual page 102

Data services
Basic setting and activation of the
connection profiles for data trans-
mission such as
The phone default setting varies
from one service provider to
another:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will also find
the current settings for the service
provider on the Internet at
www.siemens-mobile.com/customercare
in the FAQ section.
Select profile.
Select the profile.
I
Confirm selection.
C
Set profile
Select the profile.
I
§Options§
Open menu.
Open the selection.
§Edit§
Select
GPRS
I
Make the settings as
§Edit§
specified by your service
provider.
MMS, WAP.
settings, and/or
CSD
settings.
HTTP profile
The phone default setting varies
from one service provider to
another:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will also find
the current settings for the service
provider on the Internet at
www.siemens-mobile.com/customercare
in the FAQ section.
Make the settings.
I
Authentication
Activate or deactivate encrypted
dial-up (CSD connections only) for
Internet access.
Setup 101