Advertisement
A taller chimney and an interior chimney (hotter) tend
to have better draft. If the draft fluctuates from
positive to negative on windy days, consider installing
a draft inducing chimney cap, such as the Vacu-Stack
by Improved Consumer Products, Inc.
www.chimneycaps.com They do make a 4" unit.
FOLLOW THE PELLET VENT AND CHIMNEY
MANUFACTURER'S INSTALLATION
PROCEDURES.
STOVE WALL CLEARANCES: Hopper to back wall -
1" minimum. Additional clearance will give easier
access to the auger motor. Cast-iron stove to side
wall - 12". Unit to 45° adjacent wall - 1" from hopper
back corner.
VENT PIPE CLEARANCES TO COMBUSTIBLES:
The following apply unless otherwise stated by the
vent manufacturer:
Pellet "L" Vent Pipe - 3"
"Close Clearance" Double Wall Smoke Pipe - 6"
"Single Wall" Smoke Pipe - 18"
Advertisement
