Advertisement
clog from forming at the bottom of the burn pot elbow.
The auger motor will turn off automatically when you
run out of pellets. If you must shut down the stove
without running out the fuel, just hold on the POWER
button for several seconds and confirm shutdown
when asked on the screen.
plugged in so the burn-back safety features
remain active. Keep the hopper closed.
When you are finished for the season, remove all of
the pellets from the stove and clean out all of the
ashes. Raw metal surfaces may be sprayed with
WD-40 or equivalent rust preventative.
WARRANTY - Any component that fails under normal
service within one year of purchase will be replaced
one time at no charge. There is no allowance for
labor, shipping, or any inconvenience or extraneous
damage incurred. Claims must provide sufficient
documentation to verify failure. This may be return of
the failed component or in some cases a photograph.
All replacement parts for NU-TEC stoves are priced
economically to ensure that you may comfortably
maintain your stove for many years. If you are
comfortable changing a light fixture, you can do
anything ever required to maintain this stove.
Record your serial number in a safe place. It is found
on the Safety Label located on the lid of the hopper.
Serial Number __________________________
Keep the power cord
Advertisement
