Advertisement
four inch to six or eight inch adapter generally works
fine to tie the Upland 207P Pellet Stove into you
existing flue.
A solid fuel heater may not share a flue with any
other device. If your flue has multiple inlets, the
unused thimbles should be properly sealed.
If you are installing into a prefabricated chimney the
easiest connection is to purchase the
manufacturer s specific 4 in. Pellet Pipe to Chimney
Adapter. At the time of this writing, the largest
manufacturers of pellet vent and prefab chimneys,
Metal-Fab inc., Simpson Dura-Vent, and Selkirk
Metalbestos produce adapters specifically designed
for their systems. Your connection will be easier if
you purchase your L-Pellet Vent or All Fuel Vent
from the same manufacturer that produced your
chimney.
DRAFT:
chimney, ensure that under normal conditions it has a
positive draft. Smoke from a match, cotton rope or
cigarette should be drawn up the chimney. If the
smoke is blown back into the room, your chimney
should be reviewed by a certified chimney sweep or
certified stove installer.
The Upland 207P Pellet Stove may be installed with
any recognized 4 in. Pellet or All Fuel vent pipe.
Clear the roof as illustrated on the following pages.
When installing to into an existing
Advertisement
