Led Descriptions; Allowing Engineer Access - C&K systems Securit 703 User Instructions

Press the * key to finish.
You should test your system at regular intervals, to aid this a walk test
mode is provided. You are allowed to test all ALARM devices. DO NOT TEST
ANY PERSONAL ATTACK BUTTONS.
IMPORTANT.
If you have any problem with your system or any difficulty understanding it's
operation please contact your Alarm Installer immediately. They will be
pleased to help.

4.6 LED DESCRIPTIONS

Here is a description of the four status LEDS on the keypad (Day Led Version).
LED NAME
MAINS
DAY
FAULT
Here is a description of the four status LEDS on the keypad (Normal Version).
LED NAME
MAINS
ENG
FAULT
4.7

ALLOWING ENGINEER ACCESS

As a user, you can ( if previously selected ) Can allow, disallow the engineer
access to your panel. ( usually in high security areas ). To allow access to
7
8
9
0 THE LAST ALARM
COLOUR
GREEN MAINS FAIL
YELLOW PANEL SET
YELLOW BATTERY OK
YELLOW
COLOUR
GREEN MAINS FAIL
YELLOW
YELLOW
YELLOW
LOG 7
LOG 8
LOG 9
OFF
MAINS ON
PANEL UNSET
BATTERY FAULT
LINE FAULT OR
LINE OK FAILURE TO
COMMUNICATE
OFF
MAINS ON
OK CALL ENGINEER
POWER POWER
OK FAULT
LINE FAULT OR
LINE OK FAILURE TO
COMMUNICATE
5
ON FLASHING
ENGINEERING
MODE
N / A
THERE IS STILL A
BATTERY FAULT OR
CALL ENGINEER
THERE IS STILL A
LINE FAULT OR
FAILURE TO
COMMUNICATE
ON FLASHING
ENGINEERING
MODE
N / A
THERE IS STILL A
POWER FAULT
THERE IS STILL A
LINE FAULT OR
FAILURE TO
COMMUNICATE