TC-Helicon VoiceTone Create.XT Product Manual page 9

Step 7:
Carefully raise the gain and/or volume on your sound
system mic input channel and master volume until you
hear a good level from your vocals.
Step 8:
Initial setup and operation is shown below. After setting,
sing to hear Create XT's factory effects.
Tap to advance
through factory
presets 0-9
a) Tap to switch A and B
settings in each preset
Quick Start
Press until
LED lights up
Pedal
3
should be off
Hold for Preset Hold for Tap
Stereo LED
Tap to light
On LED and
hear effects
9