Rear Brake Pad Inspection And Replacement - Yamaha YZ125N1 Service Manual

REAR BRAKE PAD INSPECTION AND REPLACEMENT

9Install the pad pin plug
Pad pin plug:
3 Nm (0.3 m•kg, 2.2 ft•lb)
3. Inspect:
9Brake fluid level
Refer to
INSPECTION" section.
4. Check:
9Brake lever operation
A softy or spongy feeling
system.
Refer to "BRAKE SYSTEM AIR BLEED-
ING" section.
EC366060
REAR BRAKE PAD INSPECTION AND
REPLACEMENT
1. Inspect:
9 Brake pad thickness a
Out of specification
Brake pad thickness
Standard
6.4 mm (0.25 in)
2. Replace:
9 Brake pad
Brake pad replacement steps:
9Remove the protector 1 and pad pin plug
2.
9Loosen the pad pin 3.
9Remove the rear wheel 4 and caliper 5.
Refer to "FRONT WHEEL AND REAR
WHEEL" section in the CHAPTER 5.
3-21
INSP
ADJ
w.
"BRAKE FLUID LEVEL
Bleed brake
Replace as a set.
a a :
<Limit>
1.0 mm (0.04 in)