Lightolier Calculite ProSpec Linear Downlight PE4M1675 Specifications

Page 1 of 2
14 3/4"
11
18 3/4"
Top View
45° Beveled Flange
Ceiling Cutout: 12 1/16"L x 6 3/16"W
Ordering Information: MR 16 Series E
Cat. No.
PE4M167EBL
PE4M167EWL
Add a "1" for 120v or "2" for 277v at the
end of the catalog number for voltage
Features
1. Mounting Frame: Provides clean support for Elbow and overlapping flange
installation. Extruded aluminum and aluminum plate, rigidly welded together
on all corners. Matte white finish.
2. Elbow: Seamless; diecast aluminum. Allows 358° horizontal and
70° vertical adjustment.
3. Stepped Baffle: Diecast aluminum. Matte black finish for low brightness.
4. Tortiontite Spring: For easy installation of mounting frame.
5. Housing: Die formed 22 ga. steel. Finish: Black.
6. Mounting Brackets: Adjustable vertically from outside of housing.
7. Thermal Protector: Meets NEC / UL & CEC / CSA requirements.
8. Lampholder: Steatite for GX/GY 5.3 Bi-Pin MR-16 lamps. 250° C Teflon
leads.
9. Junction Box: 14 ga. steel, 4" x 3-1/2" x 3" box. Allows inspection
from below.
10. Lamp Guard: Heat resistant clear glass. May be replaced with solid glass
accessory. Lamp manufacturers requirement.
11. Transformer Housing: Die formed steel.
Electrical
Electronic Transformers: Offer reliable operation and are accessible from
below for servicing. 12V. Secondary 75 VA. each lamp.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
UL/cUL listed for through branch circuit wiring with maximum of
(4) no. 12 AWG, 90°C.
Calculite ProSpec
®
9 3/4"
7
33 3/4"
9
8 3/4"
Depth
1 3/4"
Add a "1" for 120v or "2" for 277v at the end of the catalog number for voltage
Lamp
(4) 75W MR 16*
(4) 75W MR 16*
*50W Max. when used with accessories.
®
Linear Downlight
®
31 3/8" L X 10" W
4 7/8" OC
4 7/8" OC
8
3
2
1
10
20" L X 5" W Opening
Ceiling Trim
Overlap
Overlap
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: Lamp guard may be replaced with 2"dia. series filters and lenses
only. The use of accessories redu0ces the lamp wattage rating to 50W.maximum.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
Teflon is a registered trademark of E.I. DuPont.
®
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • C0306
PE4M1675
4 Light MR 16 Series E
5
4
4 7/8" OC
Aperture Finish
White with Black aperture
Black with Black aperture
Type:
www.lightolier.com
6