Table of Contents
Advertisement
There are only
Have the Windows colors
16 colors
been set properly?
shown on the
screen.
The screen
colors have
Has the video card been
changed after
set properly?
changing the
video card.
There is a
Have you installed the
message that
monitor driver?
reads
"Unrecognized
See the video card
monitor, Plug &
manual to see if the Plug
Play (VESA
& Play (VESA DDC)
DDC) monitor
function can be supported.
found".
Problems
No sound
related to
Audio
Sound level is too low.
Check when
MagicTune™ feature is
MagicTune™
found only on PC (VGA)
does not
with Window OS that
function
supports Plug and Play.
properly.
MagicTune™
Have you changed your
doesn't work
PC or video graphic card?
properly.
Did you install the
program?
Visit our website and download the installation software for MagicTune™ MAC.
Downloaded from ManualMonitor.com Manuals
Windows ME/2000/XP:
Set the colors properly at the
Control Panel → Display →
Settings .
Set the video card by referring to the
video card manual.
Install the monitor driver according
to the
Driver Installation
Instructions.
Install the monitor driver according
to the
Driver Installation
Instructions.
Ensure that the audio cable is firmly
connected to both the audio-in port
on your monitor and the audio-out
port on your sound card.
(Refer to
Connecting the
Monitor)
Check the volume level.
Check the volume level.
If the volume is still too low after
turning the control to its maximum,
check the volume control on the
computer sound card or software
program.
* To check whether your PC is
available for MagicTune™ feature,
follow the
steps below (When Windows is
XP);
Control Panel -> Performance and
Maintenance -> System ->
Hardware -> Device Manager ->
Monitors -> After deleting Plug and
Play monitor, find 'Plug and Play
monitor' by searching new
Hardware.
MagicTune™ is an additional
software for the monitor. Some
graphic cards may not support your
monitor. When you have a problem
with the graphic card, visit our
website to check the compatible
graphic card list provided.
http://www.samsung.com/monitor/magictune
Download the latest program. The
program can be downloaded
http://www.samsung.com/monitor/magictune.
Reboot the computer after installing the program for
the first time. If a copy of the program is already
installed, remove it, reboot the computer, and then
install the program again. You need to reboot the
computer for it to operate normally after installing or
removing the program.
Advertisement
Table of Contents
