Connecting The Monitor - Samsung SyncMaster 204BM User Manual

Connecting the Monitor

Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use appropriate connection for your computer.
Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
Using the DVI (Digital) connector on the video card.
Connect the DVI Cable to the DVI IN port on the back of your monitor.
Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the D-sub connection cable.
If the monitor and the computer are connected, you can turn them on and use them.
Downloaded from ManualMonitor.com Manuals
[ RGB IN ]
[ DVI IN ]
Cable Fix Ring
When connecting the cable is finished fix the cables to the
Cable Fix Ring.