Table of Contents
Advertisement
The Auto Rotation may not be supported depend on the monitor model.
If you rotate the screen without lifting it to its maximum height, the screen may be
damaged because the edge of the screen would hit the floor.
Attaching a Base
This monitor accepts a 100 mm x 100 mmVESA-compliant mounting interface pad.
A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove screws and then remove the Stand from the LCD monitor.
4. Align the mounting interface Pad with the holes in the rear cover mounting pad and secure it
with four screws that came with the arm-type base, wall mount hanger or other base.
Do not use screws longer than the standard dimension, as they may damage the inside
Downloaded from ManualMonitor.com Manuals
A. Stand Stopper
HAS Stand
Advertisement
Table of Contents
