Software Update - Samsung HW-H450 User Manual

FUNCT ONS
SOFTWARE UPDATE
Samsung may offer updates for the Soundbar's
system firmware in the future,
tf an update is offered, you can update the firmware
by connecting a USBdevice with the firmware
update stored on it to the USBport on your
Soundbar,
Note that if there are multiple update rites, you must
toad them onto the USBdevice singly and use them
to update the firmware one rite at a time,
Pteasevisit samsung,com or contact the Samsung
cat1center to receive more information about
downloading updates rites,
• Insert a USBdevice containing the
firmware update into the USBport on the
main unit,
• Updating firmware may not work properly
if audio files supported by the Soundbar
are stored in the USBstorage device,
• Do not disconnect the power or remove
the USBdevice while updates are being
applied, The main unit will turn off
automatically after completing the
firmware update,
• After reset, att settings are reset to their
facto6, default setting£ We recommend
you write down your settings so that you
can easity reset them after the update,
Note that updating firmware resets
subwoofer connection too_ tf connection
to the subwoofer is not established
automatically after resetting,
refer to page 13.
tf the firmware faits to update, we
recommend formatting the USBdevice in
FAT16 and trying again,
• Once the software update is completed,
turn off the product and then press and
hotd the ( _ll ) button on the remote
control for more than 5 seconds, "BNIT"
appears on the display and the unit is
powered off, The updgrade is complete,
• Do not format the USBdevice in the NTFS
format, The Soundbar does not support
the NTFSfile system,
• Depending on the manufacturer, some
USBdevices may not be supported,
22