Samsung HW-H450 User Manual page 13

CONN}!CT ONS
CONNECTING THE WIRELESS SUBWOOFER
The Subwoofer's 1inking ID is preset at the facto_ and the main unit and subwoofer should 1ink(connect
wirelessly) automatically when the main unit and subwoofer are turned on_ If the Link indicator ( _ ) does not
tight when the main unit and subwoofer are turned on, ptease set the ID by following the procedure betow_
ID SET
O
@
@@
!. Plug the power cords of the main unit and
subwoofer into an AC watt outtet.
2. Pressthe BD SETbutton on the back of the
subwoofer with a stoat1,pointed object for
5 seconds,
• The STANDBYindicator is turned off and the
LINKindicator (Blue LED) blinks quickly.
S. White the main unit is powered off (in STANDBY
mode), press and hotd the MUTE ( _ ) on the
remote control for 5 seconds.
4. The BDSETmessage appears on the Soundbar's
display.
5. To finalize the link, turn the main unit's power on
white the subwoofer's Btue LEDblinks.
• The main unit and the subwoofer should
now be 1inked(connected).
• The Link indicator (Blue LED)on the
subwoofer should be on.
• tf the Link indicator is not solid blue, the
1inking processhas faited. Turn off the main
unit and start again from Step 2.
• YOu can enjoy better sound from the wireless
subwoofer by selecting a Sound Effect.
(Seepage t 0)
13
• Before moving or installing the product,
be sure to turn off the power and
disconnect the power cord.
• tf the main unit is powered off, the
wireless subwoofer wit1 be in standby
mode and the STANDBYLED on the
upper side wit1come on after the Link
indicator (Blue LED) blinks for 30 seconds.
• tf you use a device that usesthe same
frequency (2.4GHz) as the Soundbar near
the Soundbar, inte,fference may cause
some sound interruption.
• The transmission distance of the wireless
signat between the main unit and
subwoofer is about 33 ft., but may van,
depending on your operating
environment, tf a ste@concrete or
metallic watt is between the main unit and
the wireless subwoofer, the system may
not operate at all, because the wireless
signat cannot penetrate metat.
• tf the main unit doesn't make a wireless
connection, foltow steps I-5 in the left
hand cobmn to re-set the connection
between the main unit and wireless
subwoofer.
The wireless receiving antenna is buitt into
the wireless subwoofer. Keep the unit
away from water and moisture.
Foroptimal listening pe,fformance, make
sure that the area around the wireless
subwoofer tocation is dear of any
obstructions.