Wireless Screen - bq Edison 3 User Manual

Complete User Manual
Edison 3
Settings

Wireless Screen

You can also use your tablet to transmit an audio/video signal to a remote screen via
the Wi-Fi network. To do so, you will need a TV that is compatible with the Miracast/
DLNA protocol. Follow the steps below to set up your Edison 3 and transmit content
to your TV:
1. Turn on the compatible TV and activate the Wireless screen mode (the
activation method may vary depending on manufacturer).
2. On your tablet, go to Settings > Display > Display.
3. Towards the bottom of the list, select the option Cast screen.
4. Select the device you wish to transmit the audio/video signal to via your
tablet.
5. After a few seconds, your tablet will begin transmitting content to your TV
in real time.
30
ENGLISH