Getting Started; Inserting/Removing The Microsd Card - bq Edison 3 User Manual

Complete User Manual
Edison 3

Getting Started

GETTING STARTED

Inserting/Removing the MicroSD Card

Your bq Edison 3 has an internal memory of 32 GB (see the specifications for your
model). This can be expanded by up to 32 GB through the use of a MicroSD card.
To insert a MicroSD card, do the following:
Insert the MicroSD card into the slot, making sure the metal pins are at the bottom
and facing backwards (i.e. towards the back of the device).
Push the card in until you notice a slight click, which indicates that it has been
inserted correctly. If the card is not inserted correctly, the device may not recognise
it and its content will not be available.
To remove the MicroSD card, follow the steps above in reverse, bearing in mind the
following recommendations:
a. For greater security, switch the device off before removing the microSD card.
b. If you need to remove the microSD card while the device is switched on, first
unmount it in order to avoid damaging the card and losing the data stored
on it.
To unmount the card, open the Settings menu on your device and go to Storage >
Remove SD card.
10
ENGLISH