Fujitsu Sparc Enterpise M8000 Product Notes page 73

Solaris OS Issues Fixed in Solaris 10 5/08 (Continued)
TABLE 11
CR ID Description
6522433 After the CPU hardware error occurred, the
fmdump(1M) command on the domain may
display an incorrect faulty component.
6527811 The showhardconf(8) command on the XSCF
cannot display PCI card information that is
installed in External I/O Expansion Unit, if the
External I/O Expansion Unit is configured
using PCI hotplug.
6536564 showlogs(8) and showstatus(8) command
on XSCF might report wrong I/O component
due to wrong diagnosis by Solaris Fault
management Architecture when faults in I/O
devices occur.
6545143 There is a low probability that a system panic
can occur during trap processing of a TLB miss
for a user stack address. The problem can
occur if the user stack is unmapped
concurrently with the user process executing a
flush windows trap (ta 3). The panic message
will contain the following string:
bad kernel MMU trap at TL 2
Workaround
For Solaris 10 8/07 or earlier, this has been
fixed in patch 127127-11.
[Workaround]
Check system status on XSCF.
For Solaris 10 8/07 or earlier, this has been
fixed in patch 128346-01.
No workaround is available.
For Solaris 10 8/07 or earlier, this has been
fixed in patch 125369-05.
[Workaround]
To avoid this problem, issue the following
commands on the domain.
# cd /usr/platform/SUNW,SPARC-
Enterprise/lib/fm/topo/plugins
# mv ioboard.so ioboard.so.orig
# svcadm restart fmd
If the following messages are displayed on the
domain, contact a service engineer.
Example:
SUNW-MSG-ID: SUNOS-8000-1L, TYPE:
Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Sun May 6 18:22:24 PDT
2007
PLATFORM: SUNW,SPARC-Enterprise,
CSN: BE80601007, HOSTNAME: sparc
For Solaris 10 8/07 or earlier, this has been
fixed in patch 127111-08.
No workaround is available.
Information About Software 61