Fujitsu Sparc Enterpise M8000 Product Notes page 51

XCP Issues Fixed in Releases Earlier Than XCP 1092 (Continued)
TABLE 6
ID Description
RTIF1- When you set the XSCF user account name to
070914-006 the maximum 32 characters, you can log in,
but then, when you execute the XSCF Shell or
operate the XSCF Web, "Permission
denied" occurs.
RTIF1- On the XSCF Web, when you use Internet
070914-007 Explorer and select Log Archives, the Status of
Log Archiving screen doesn't show the status
information.
RTIF1- On the XSCF Web, when you select POP or
070914-008 SMTP-auth on the SMTP screen to enter
Password, the input value doesn't appear as
"*".
RTIF1- On the XSCF Web, when selected POP or
070914-009 SMTP-auth on the SMTP screen, the setting
can be done while the input field remains
blank. And despite the setting done, the past
setting data appears.
RTIF1- On the XSCF Web, on the SNMPv3 Security
070914-010 Settings screen, when you select Add User or
Copy User of the SNMP User-Based Security
Model (USM), the Create or Copy User screen
appears as a pop-up. On this screen, when you
set the SNMP User with 16 digits or more, it
will be registered correctly but the web
browser screen displays up to 15 digits.
RTIF1- On the XSCF Web, on the SNMPv3 Security
070914-011 Settings screen, when you select Change
Password of the SNMP User-Based Security
Model (USM), the Change Password screen
appears as a pop-up. On this screen, despite
the "Confirm Password" is a field which must
be entered, it is not displayed with the note "*
Indicates require field."
RTIF1- On the XSCF Web, on the SNMP-Properties
070914-012 screen, when you don't select Trap Host and
execute the Remove button, the invalid
message "The trap host will be
removed" appears as a pop-up. And when you
select OK on the pop-up screen, the invalid
message "Remove trap host failed.
setsnmp: invalid trap type" appears.
Workaround
Use up to 31 characters to set the XSCF user
account name.
None available at this time.
None available at this time.
None available at this time.
When you set the SNMP User with 16 digits or
more, use the showsnmpusm(8) command.
Do not fail to set Confirm Password which is a
field must be entered.
None available at this time.
Information About Software 39