For Vigor2860Vac - Draytek Vigor2860 Series Quick Start Quide

1 . 1 . 6 F o r V i g o r 2
1 . 1 . 6 F o r V i g o r 2
LED
ACT (Activity)
USB
2.4G/5G
WAN2
DSL
Line
Phone (1-2)
LED on Connector
Left
WAN2
LED
8 6 0 V a c
8 6 0 V a c
Status Explanation
Blinking The router is powered on and running
normally.
Off The router is powered off.
On USB device is connected and ready for use.
Blinking The data is transmitting.
On
Wireless access point with bandwidth of
2.4GHz/5GHz is ready.
Blinking
It will blink slowly while wireless traffic
goes through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
On Internet connection is ready.
Off Internet connection is not ready.
Blinking The data is transmitting.
On The router is ready to access Internet
through DSL link.
Blinking Slowly: The DSL connection is ready.
Quickly: The connection is training.
On A PSTN phone call comes (in and out).
However, when the phone call is
disconnected, the LED will be off.
Off There is no PSTN phone call.
On The phone connected to this port is
off-hook.
Off The phone connected to this port is
on-hook.
Blinking A phone call comes.
On The port is connected.
Off The port is disconnected.
13
Vigor2860 Series Quick Start Guide