Washer Fluid Check; Technical Specifications - Ford Fiesta Owner's Handbook Manual

WASHER FLUID CHECK

TECHNICAL SPECIFICATIONS

Vehicle fluids
Item
Engine oil
Power steering fluid
Antifreeze
Brake fluid
Do not use oils which do not meet the specifications or requirements.
Use of unsuitable oil may lead to engine damage which is not covered by
the Ford Warranty.
1
You can use an alternative SAE 5W-30 engine oil, providing it meets the
specification defined by WSS-M2C913-B.
Note: If you operate your vehicle in temperatures below -20°C, you must
not use SAE 10W-40 engine oil.
Topping up the oil: If you are unable to find an oil that meets the
specification defined by WSS-M2C913-B, you must use SAE 5W-30
(preferred), SAE 5W-40 or SAE 10W-40 that meets the specification defined
by either ACEA A1/B1 (preferred) or ACEA A3/B3. Using these oils can result
in longer engine cranking periods, reduced engine performance, reduced
fuel economy and increased emission levels.
Maintenance
Note: The front and rear washer
systems are supplied from the same
reservoir.
Recommended fluid
Ford or Motorcraft
Formula E SAE 5W-30
1
Engine Oil
Ford or Motorcraft
Power Steering Fluid
Motorcraft SuperPlus
Antifreeze
Ford or Motorcraft Super
DOT 4 Brake Fluid
CAUTION
119
Specification
WSS-M2C913-B
WSS-M2C195-A
WSS-M97B44-D
ESD-M6C57-A