ActionTec SBWD100B User Manual page 43

Setting Up P2P Network Parameters
When AGO is enabled, network parameters for peer-to-peer (P2P) connections,
including P2P wireless network name (SSID), password, IP address, subnet mask,
and DHCP IP address range can be defined
To set up P2P network parameters:
1. Click Network Settings.
2. The Network Settings window appears. Scroll down to the Wireless Interface
Setting section.
3. Enter a P2P address in the appropriate text boxes. This is IP address of the
Receiver in a P2P connection. The address appears in the left corner of the
Ready to connect screen.
4. Enter a P2P subnet mask address in the appropriate text boxes. This is the sub-
net mask for the network established in the P2P connection.
5. Enter the P2P DHCP start and end addresses in the appropriate text boxes.
These define the range of IP addresses assigned to the connected devices.
Note: P2P Wireless Network Name (SSID) and P2P Wireless Network Password
are not configurable at this time.
ScreenBeam Pro - Business Edition
41