Ford Mustang 2013 Owner's Manual page 244

244
Replacing HID headlamp bulbs
The headlamps on your vehicle use a "high intensity discharge" source.
These lamps operate at a high voltage. When the bulb is burned out, the
bulb and starter capsule assembly must be replaced by your authorized
dealer.
Replacing front parking lamp/turn signal bulbs
1. Make sure the headlamp control is in the off position and open the hood.
2. Remove the hex head screws attaching the beauty shield at the top,
forward edge of the engine compartment just aft of the headlamps.
3. Remove the beauty shield to gain access to the front parking lamp/turn
signal assembly.
5. Carefully pull the bulb straight out of socket.
Install the new bulb in reverse order.
Replacing front sidemarker bulb
1. Make sure the headlamp control is in the off position.
4. Rotate the socket counterclockwise and remove from the lamp assembly.
2013 05+ Mustang (197)
Owners Guide gf, 1st Printing
USA (fus)
Maintenance
4. Rotate the socket
counterclockwise and remove from
the lamp assembly.
2. Remove the hex head screws
attaching the underbody forward
aeroshield.
3. Remove the underbody forward
aeroshield to gain access to the
front sidemarker assembly.