Sony Handycam DCR-SR30E Operating Manual page 9

To charge the battery pack using only
the AC Adaptor
Slide the POWER switch up to OFF (CHG),
then connect the AC Adaptor directly to the
DC IN jack on the camcorder.
DC IN
jack
DC plug
Available running time for the
supplied battery pack NP-FP50
Charging time:
Approximate time (min.) required when you
fully charge a completely exhausted battery
pack.
Recording/Playback time:
Approximate time (min.) available when you
use a fully charged battery pack.
Charging time
Recording time *
Continuous
recording time
Typical
4
recording time *
Playback time
1
* When [REC MODE] is set to [HQ].
2
*
When the LCD backlight turns on.
3
* When the LCD backlight turns off.
Downloaded From VideoCamera-Manual.com Manuals
POWER switch
Open the jack cover
(Unit:min.)
DCR-SR50E/
DCR-SR30E/
SR60E/
SR40E
SR70E/SR80E
125 125
1
100*
125
110*
55*
65
60*
140 120*
4
*
Typical recording time shows the time when you
repeat recording start/stop, turning the power on/
off and zooming.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF (CHG).
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the DC
IN jack of your camcorder, even when the mains
lead is removed from the wall socket.
On the charging/recording/playback time
• Times measured with the camcorder at 25°C
(77°F). (10-30°C (50-86°F) is recommended.)
• Available recording and playback time will be
shorter when you use your camcorder in low
temperatures.
• The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
On the AC Adaptor
• Connect the AC Adaptor to an easily accessible
wall socket close by. If any trouble occurs while
using the adaptor, immediately shut off the power
by removing the plug from the wall socket.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
PRECAUTION
• Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
2
3
2
3
2
9