Parts And Functions Used For The Camcorder - Sony Handycam DCR-SR30E Operating Manual

Parts and functions used for the camcorder

Handycam
Station
Recording
1 NIGHTSHOT PLUS switch
To record in dark places, set the
NIGHTSHOT PLUS switch to ON. (
["NIGHTSHOT PLUS"] appear.)
2 Power zoom lever
To use zoom, move the power zoom lever.
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
W:Wide
Wider range of view
T:Telephoto
Close view
5 Built-in stereo microphone
Records sound.
6 Remote sensor
(DCR-SR50E/SR60E/SR70E/SR80E)
Receive the signal from the Remote
Commander.
Downloaded From VideoCamera-Manual.com Manuals
14
7 Recording lamp
(DCR-SR50E/SR60E/SR70E/SR80E)
The recording lamp lights up red during
recording. The lamp flashes when the
remaining capacity for the battery or the hard
and
disk of the camcorder is running low.
8 Tripod receptacle (Bottom surface)
To use a tripod, attach the tripod (optional:
the length of the screw must be less than 5.5
mm) to the tripod receptacle using a tripod
screw.
9 Zoom buttons
Press for zooming in/out.
q; LCD screen
To record in mirror mode, open the LCD
screen 90 degrees to the camcorder (1), then
rotate it 180 degrees to the lens side (2).