Step 3: Turning The Power On And Setting The Date And Time - Sony Handycam DCR-SR30E Operating Manual

Step 3: Turning the power on and setting the date
and time
1
Touch the
button on the
LCD screen.
1
Remove the lens cap by pressing
both tabs on the sides of the cap.
Pull the lens cap string down until
stopped by the grip belt (DCR-
SR30E/SR40E).
2
Turn on the power by sliding the
POWER switch in the direction of
the arrow while pressing the green
button in the center.
When you record or play back an image,
slide the POWER switch in the direction
of the arrow repeatedly until the
respective lamp lights up.
(Movie): To record movies
(Still): To record still images
(PLAY/EDIT): To play back images on
your camcorder, or to edit/delete them
3
Select the desired geographical
area with
Downloaded From VideoCamera-Manual.com Manuals
10
/ , then touch
When using the camcorder for
the first time, the [CLOCK SET]
screen appears on the LCD
screen.
3 4
&
4
Set [SUMMERTIME], [Y] (year), [M]
(month), [D] (day), hour and
minute.
The clock starts.
• The recording date and time are not displayed
during recording but are automatically recorded
onto the hard disk and displayed during playback
(see "Handycam Handbook" (PDF)).
When resetting the date and time
You can set the desired date and time by
touching
TIME/LANGU. t [CLOCK SET]
(p.22).
.
2
CLOCK SET
AREA1 GMT +0.0
Lisbon , London
OFF
SUMMERTIME
DATE
2006 Y 1 M 1 D 0 00
OK
t [SETUP] t