Lifescan OneTouch Ultra 2 Owner's Booklet page 47

Lifescan blood glucose monitoring owner's booklet ultra 2

Hide thumbs Also See for OneTouch Ultra 2:

3. Get ready to transfer readings

Connect the OneTouch

your computer.

Make sure the meter is turned off. If you insert the cable while the meter is

already on, the meter will not respond to computer commands. Then connect

the other end of the OneTouch

Interface

cable

4. Transfer data

Follow the instructions provided with the OneTouch

results from the meter.

Once the command to start the download is sent from the computer to

the meter, the meter display will show "PC" indicating that the meter is in

communication mode. You will not be able to perform a test when the

meter is in communication mode.

™

Interface Cable to the COM or USB port on

™

Interface Cable to the meter data port.

™

DMS to download the

Customer Service 1 800 227-8862

Onetouch ultra2