®
Invacare
- FDX
4.2.1
ACS 2 PMB70 / ACS 2 PMB70L electronic module
Connections
1) Battery 24V
2) Bus cable (to remote or ACT)
3) Bus cable (to remote or ACT)
4) Motor M1
5) Light
6) Motor M2
Rubber stoppers for free slots
2) & 3)
Order number: 1552876
4.2.2
ACS 2 PMA90L electronic module
Connections
1) Battery 24V
2) Cable to G-Trac sensor (GYRO)
3) Bus cable (to remote or ACT)
4) Motor M1
5) Light
6) Motor M2
4.2.3
Actuator module ACT
Various types of adjustment motors, also called actuators, can be installed on the wheelchair.
These actuators are either connected directly to the electronic module or to a separate actuator
module. The actuator module is connected to the electronic module via a bus cable.
4.2.3.1
Actuator module ACT2
Connections
1) ACI*
2) Bus cable (to remote or ACT)
3) Bus cable (to remote or ACT)
4) Adjustment motor/actuator - channel 2
5) Adjustment motor/actuator - channel 1
Rubber stoppers for free slots
1)
Order number: 1555701
2) & 3)
Order number: 1552876
4) & 5)
Order number: 1555700
* The ACI connection serves to limit the movement of an actuator or to reduce velocity.
SERVICE MANUAL
17