Assembly - Invacare rea Spirea 2 User Manual

1.
2.
3.
4a.
12

Assembly

1. Attach the rear wheels by pressing the button in
the centre of the hub whilst simultaneously sliding
the axle into the rear wheel position attachment
of the positioning plate.
It is very important that you check that the
locking pin has actually locked the wheel into
position when the centre button has been
released. Take hold of the wheels and try to
detach them. This should NOT be possible.
2. 7PHQNF VJG YJGGNEJCKT
Be careful not to trap your fingers between
seat and frame tube.
If you have a backrest bar fold it up by just fold it
up into position see page 30 for picture.
3. Insert the armrest by fitting it into the attachment
on the backrest frame and then swing it down until
it fits into position.
Do not place any fingers on the seat frame.
When having detachable armrests, just press
them down in the reciver.
4. Footrests/legrests
The wheelchair can be equipped with either foot-
rests or legrests.
4a. Footrests
Attach the footrests by pushing the tube at the
upper part of the footrests down into the tubes
on the wheelchair. You must angle the footrests
outwards when inserting them.
Lock the footrests by turning them inwards. The
footrests are automatically locked so there is no
risk of them coming off the wheelchair.
Be careful not to trap your fingers between
frame and footrest.
Spirea 2