Setting Up The Meter; Setting The Date, Time, And Unit Of Measurement - Lifescan OneTouch Owner's Booklet

SETTING UP THE METER

The OneTouch
time, and unit of measurement preset. However, if
you need to change the time, or if you remove the
batteries, you will need to enter the setting mode and
reset. You will not be able to perform a blood glucose
test until you have set up the meter completely.
CAUTION: Check your OneTouch
outer carton seal is not missing or broken. If either of these
conditions occurred, please call the OneTouch
Line at 1 800 663-5521.

Setting the Date, Time, and Unit of Measurement

To set the date, you must first enter the setting mode.
Start with the meter off. Then press and hold the M
button for three seconds. The meter is now in the
setting mode.
® ®
FastTake
®
FastTake
Set the Year.
STEP 1
The year setting will appear first. Press
and release the C button to advance one
year. To move faster, hold the C button
down. With the correct year on the display,
press the M button and the month and day
will appear on the display with the month
segment flashing.
36
Meter comes with the date,
®
System to be sure the
®
Customer Care